Warrior Stone Sealer
Warrior Stone Sealer
DESCRIPTION:
Warrior Stone Sealer is a solvent based acrylic coating which is simple to use, quick drying, and offers excellent resistance to yellowing and alkaline attack. It enhances the natural colour and restores depth, giving an attractive gloss and long lasting finish.
USES:
Warrior Stone sealer can be applied interior or exterior on a wide range of masonry surfaces e.g. Brickwork, paving and concrete floors
SPECIFICATION OR RECOMMENDED PAINT SYSTEM:
New masonry surfaces: Ensure that the surface is dry, free from all forms of dirt, sand and loose plaster or cement. Apply two coats of Warrior Stone Sealer with a drying time of 16 hours between coats. For maintenance painting, one coat may be applied.
PROPERTIES:
| APPLICATION: | Brush, Roller, and Spray |
| CLEANING SOLVENT: | E thinners |
| THINNING SOLVENT: | E thinners |
| SPREADING RATE: | PRIMER COAT: 6-8m² per litre FINAL COAT: 8-10m² per litre |
| DRYING TIMES: | SURFACE DRY: 2 hour HARD DRY: 16 hours OVERCOATING: 16 hours |
| PACK SIZE: | 1L, 5L |
| COLOUR RANGE: | Clear only |
| FLASH POINT: | >9°C |
| VISCOSITY | 15-17 sec F4 |
| SPECIFIC GRAVITY: |
0, 91 + 0, 05 kg per litre |
| FINISH: |
Gloss |
GENERAL INFORMATION:
- Surfaces must be completely dry as any residual moisture in the substrate can result in blistering.
- It is important that this product be thoroughly mixed with a flat paddle before use.
- As per standard painting practices, no painting should take place if a surface or ambient temperatures are below 10⁰C or above 30⁰C. Painting should cease at 3pm or when rain is imminent.
Contact us for the Warrior Stone Sealer.